Cub Cadet SLTX 1050 Hydro Cooling

Mouser

• Part	Description	P/N	Qty.	Unit Price	Total
  Apem IPR1SAD5-LOS	Latching pushbutton, yellow plunger, red LED	IPR1SAD5-LOS	1	$21.22	$21.22
  AMP 794894-1	Sealed Mini Universal Mate-N-Lok plug, 2-position	794894-1	2	$0.58	$1.16
  AMP 794896-1	Sealed Mini Universal Mate-N-Lok cap, 2-position	794896-1	2	$0.69	$1.38
  AMP 794772-2	Sealed Mini Universal Mate-N-Lok interface seal, 2-position	794772-2	2	$0.45	$0.90
  AMP 794805-1	Sealed Mini Universal Mate-N-Lok plug, 4-position	794805-1	2	$0.63	$1.26
  AMP 794939-1	Sealed Mini Universal Mate-N-Lok cap, 4-position	794939-1	2	$0.67	$1.34
  AMP 794772-4	Sealed Mini Universal Mate-N-Lok interface seal, 4-position	794772-4	2	$0.50	$1.00
  AMP 794758-1	Sealed Mini Universal Mate-N-Lok cavity wire seal	794772-2	24	$0.15	$3.60
  171638-1	Mini Universal Mate-N-Lok pin, 20-16AWG, tin	171638-1	12	$0.12	$1.44
  171639-1	Mini Universal Mate-N-Lok socket, 20-16AWG, tin	171639-1	12	$0.08	$0.96
  Total					$34.26

Eastern Beaver

• Part	Description	P/N	Qty.	Unit Price	Total
  20A micro relay	20A micro relay with tab	20A micro relay	1	$6.49	$6.49
  socket for micro relay	socket for micro relay	micro relay socket	1	$1.75	$1.75
  Total					$8.24

A1 Electric

• Part	Description	P/N	Qty.	Unit Price	Total
  Spal VA21-A37/C-45A	puller fan	VA21-A37/C-45A	1	$55.00	$55.00
  Total					$55.00

Grand Total

• Mouser	$34.26
  Eastern Beaver	$8.24
  A1Electric	$55.00
  Total	$97.50

Diary

• August 17, 2010
  
  • Parts arrived from Digi-Key to make the hydro fan harness. I've yet to order the fan or figure out how I'm going to mount it. With the fall approaching, I might put it off since the temperatures outside should be dropping in the next month.

• August 13, 2010
  
  • I placed an order with Digi-Key for some AMP Sealed Universal Mate-N-Lok connectors, some AWG16 wire, some resistors for LED feedback, some LEDs and an AMP pin extractor for Sealed Mini-Universal Mate-N-Lok connectors.

    
    
    
    

• August 9, 2010
  
  • The button panels arrived from Front Panel Express. The dimensions are exact. I test-fitted them in the indicator panel, they look nice.

    

• August 7, 2010
  
  • I drilled the holes for the pushbuttons in the instrument panel, and tested fitment of the Apem IP pushbuttons. Fitment is fine, I'll put harnesses on the pushbuttons and install the label panels on Monday. The nut for the pushbuttons is 14mm, but I suspect I'll snug them down with a small crescent wrench since I don't want to mess up the harnesses.

• August 3, 2010
  
  • I still need to order some wire, and some resistors for the LEDs in the pushbuttons. I'd prefer wire that's good for at least 105C, if not higher.

    The relays, relay bases and fuseholders arrived from Eastern Beaver.

    

• August 2, 2010
  
  • The button panels for the headlights and hydro cooling shipped from Front Panel Express today. They should arrive on August 9, 2010.

• July 29, 2010
  
  • The relays, relay bases and fuseholders shipped from Eastern Beaver.

• July 26, 2010
  
  • I ordered the button panels for the headlight button and the hydro fan button from Front Panel Express. I don't expect them to be here for at least 2 weeks; I used the cheapest service (7 business days) and the cheapest delivery (UPS Ground).

    

• July 25, 2010
  
  • I created label panels in Front Panel Designer. They're 23mm x 35mm. The pricing for 1 is about $20. That's with 1.5mm aluminum, black anodizing and filled engraving. I can fit 2 of them on the display panel, and 3 more between the steering column and display panel.

    I ordered relays, relay bases and fuse holders from Eastern Beaver.

• July 23, 2010
  
  • I poked at Front Panel Designer a bit to see what it'll cost to have aluminum panels made to identify pushbuttons. I need to do a real design with actual dimensions, but the price looks to be reasonable.

• July 22, 2010
  
  • The Mouser order with the IPR1SAD5-LOS pushbutton arrived. The picture on the left is the pushbuttons, the picture on the right is the Tyco/AMP sealed Mini Mate-N-Lok 4-pole connectors.

    

• July 19, 2010
  
  • The Mouser order with the IPR1SAD5-LOS pushbutton should arrive on Thursday 7/22/2010.

• July 17, 2010
  
  • I ordered some of the parts from Mouser. They didn't have the 2-position connectors in stock, so I left those off of my order and will get them elsewhere.

• July 15, 2010
  
  • I started creating the parts list for the hydro cooling.