![\"Grey](\"\/Daniel\/Tools\/ToolCart\/pics\/Grey%20Pneumatic\/81635MRD\/medium\/7543.jpg\")
<\/p>\nThis week I received a Grey Pneumatic 81635MRD Duo-Socket set. It’s a 3\/8″ drive metric set with shallow and deep sockets from 7mm to 22mm.<\/p>\n
<\/p>\n
Some observations…<\/p>\n
The blow-molded case is nicer than I expected. I usually put blow-molded cases in the recycling bin. They’re often very wasteful of space, poorly engineered and poorly built (Wera cases being one of a few exceptions). While the case for the 81635MRD isn’t nearly as nice as a Wera case, it isn’t wasteful of space and I like the fact that there’s a spot for the handle inside the case.<\/p>\n
![\"Grey-Pneumatic](\"\/Daniel\/Tools\/ToolCart\/pics\/Grey%20Pneumatic\/81635MRD\/medium\/7548.jpg\")
<\/p>\n
The ratchet isn’t terribly well-balanced with a shallow socket, but it’s fine with a deep socket. The handle is comfortable though, and the drive has NO play at all; I’m guessing this ratchet is sealed up better than any other quick-release ratchet I own, and the head is slim with the quick-release button and the direction change lever recessed. I think it’ll work fine in the tight confines of a modern engine bay.<\/p>\n
Now to the sockets, which was the whole reason I bought this set. The Duo-Sockets are intended for both manual and impact tools. Just looking at them, I don’t think they’re any thicker than any of my chrome hand sockets, or at least not by much. I’ve no idea how strong they are, and given that I try not to abuse my tools, only time will tell. But I didn’t buy them for use with my impact tools; I bought them because they have large laser etching of the sizes AND a nicely darkened roll-stamp of the size on the base. They’re easier to read than any of my other sockets.<\/p>\n
As shipped, all of the parts are coated with rust-prevention goop that’s tacky in feel. I removed it all with Totally Awesome cleaner and water, then coated them with EEZOX. Here’s a picture of two of the sockets.<\/p>\n
![\"Grey](\"\/Daniel\/Tools\/ToolCart\/pics\/Grey%20Pneumatic\/81635MRD\/medium\/7560.jpg\")
<\/p>\n","protected":false},"excerpt":{"rendered":"
This week I received a Grey Pneumatic 81635MRD Duo-Socket set. It’s a 3\/8″ drive metric set with shallow and deep sockets from 7mm to 22mm. Some observations… The blow-molded case is nicer than I expected. I usually put blow-molded cases in the recycling bin. They’re often very wasteful of space, poorly engineered and poorly built … <\/p>\n