The replacement motor for my old Hoover F5853-900 arrived today from an eBay seller.<\/p>\n
By looks alone, the new motor won’t hold up as long as the old one did. However, looks can be deceiving. And I don’t expect to get another 15 years out of this carpet cleaner anyway, at least not as my primary cleaner.<\/p>\n
I installed the new motor. An interesting side note… on the impeller end of the new motor, there was a guard. This part isn’t used in my SteamVac, and is easily removed without tools. However, I can envision why it’s there on newer units. One of the things that happened with my old motor: once the bearing had too much play, the impeller rubbed and melted some of the housing in the vacuum base. The guard that’s unused on my SteamVac would serve as a sacrificial part when the motor or impeller fails. It would also prevent large foreign objects from ever hitting the impeller.<\/p>\n
After reassembly, I ran the cleaner on the rug in the kitchen. It’s running almost like new. No unpleasant motor noises, no leaks. Hooray for getting my carpet cleaner back in working order for $60!<\/p>\n
If I wind up with a functioning carpet cleaner for a year, I’ll be a very happy camper. With the original motor having gone bad, this carpet cleaner was rescued from the landfill.<\/p>\n
No pictures taken because I’m still under the weather and just wanted to get it done. The motor I bought was listed as “Genuine Hoover Steam Vac 7.9 Amp Motor 43576202” and came from seller glenmullet.<\/p>\n","protected":false},"excerpt":{"rendered":"
The replacement motor for my old Hoover F5853-900 arrived today from an eBay seller. By looks alone, the new motor won’t hold up as long as the old one did. However, looks can be deceiving. And I don’t expect to get another 15 years out of this carpet cleaner anyway, at least not as my … <\/p>\n