M8 knurled rivet nuts installed (McMaster-Carr 95105A191)

M8 knurled rivet nuts installed (McMaster-Carr 95105A191)

M8 knurled rivet nuts installed (McMaster-Carr 95105A191)

stock lid on top of z3bass lid, front driver side corner

stock lid on top of z3bass lid, front passenger corner

stock lid on top of z3bass lid, front driver side corner

stock lid on top of z3bass lid, front passenger side corner

stock lid on top of z3bass lid, passenger side

stock lid on top of z3bass lid, rear passenger side corner

stock lid on top of z3bass lid, rear driver side corner

stock lid on top of z3bass lid, driver side

stock lid on top of z3bass lid, front

neopreme/nylon/neoprene spacers on top of installed rivet nuts

neopreme/nylon/neoprene spacers on top of installed rivet nuts

neopreme/nylon/neoprene spacers on top of installed rivet nuts

lid rev. 2 positioned more toward back of car. Curves now match in front, front lip is back from console edge a bit.

lid rev. 2 positioned more toward back of car. Curves now match in front, front lip is back from console edge a bit.

fender washers and neopreme washers inside enclosure (the one that cracked while drilling hole, due to a void)

lid rev. 2 positioned more toward back of car. Curves now match in front, front lip is back from console edge a bit.

JL Audo grill masked for powdercoating