Daniel's Tool Cart Wish List

Main

Site Map

Blog

Calendar

Gallery

Site Traffic

Site Health

Related Tool Cart Tools Tool Cart Wish List Tools

Partners spcarsplus

Genealogy

Children (1) Tool Cart Tools pics

Siblings (1) Daniel's Tool Cart Tool List

Ancestors (2) Daniel's Tools Daniel

Daniel's Tool Cart Wish List

Last Modified Jan 6, 2015

Herein is the list of tools I'd like to place in smaller cabinets/chests that I will move around as needed. However, there are some things listed here that won't be in the cabinets or chests, but instead be hung on pegboard or placed on shelves. The C-clamps, the Systainers, small toolboxes, etc.

The intent of these cabinets/chests is mostly mechanical. There won't be many (if any) woodworking tools, nor any electrically powered tools. Smaller air tools might be in these cabinets/chests: air ratchets, 90-degree die grinder, impact wrench, blow guns, tire inflator/gauge. I'm also trying to keep only very good tools in here: no tools of questionable quality that won't last more than a few jobs.

Tools by Category

Systainers

Part	Description	P/N	Qty.	Unit Price	Total
Festool Systainer 5 T-Loc for strong detailing sprays	12" deep	497567	0	$86.00	$0.00
Festool Systainer cart	mobile base for Systainers	492388	1	$81.00	$81.00
Festool Systainer 4 T-Loc for detailing stuff, battery chargers	12" deep	497566	4	$80.00	$320.00
Festool Systainer 3 T-Loc for detailing stuff	8" deep	497565	1	$76.00	$76.00
Festool Systainer 1 T-Loc for detailing clay	4" deep	497563	0	$63.00	$0.00
Total					$477.00

Small rolling toolboxes

Part Description P/N Qty. Unit Price Total

Toolstud 10.5" adjustable-height rolling cantilever toolbox 202018275 2 $119.00 $238.00

Total $238.00

Clamps

Part	Description	P/N	Qty.	Unit Price	Total
Wilton 14299	12" C-clamp, drop-forged, 6.3125" throat depth, copper plated spindle	14299	2	$119.00	$238.00
Wilton 14271	8" C-clamp, drop-forged, 5" throat depth, copper plated spindle	14271	4	$49.00	$196.00
Wilton 14257	6" C-clamp, drop-forged, 4.125" throat depth, copper plated spindle	14257	4	$39.00	$156.00
Irwin 2021450N	50" Quick-Grip XP one-handed bar clamp	2021450N	4	$37.00	$148.00
Irwin 2021463	36" Quick-Grip XP one-handed bar clamp	2021463	4	$33.00	$132.00
Irwin 2021424N	24" Quick-Grip XP one-handed bar clamp	2021424N	4	$29.00	$116.00
Wilton 14243	4" C-clamp, drop-forged, 3.25" throat depth, copper plated spindle	14243	4	$25.00	$100.00
Total					$1086.00

3/8" Drive

Part	Description	P/N	Qty.	Unit Price	Total
SK 3911	3/8" drive 10-piece metric flex socket set, 10mm - 19mm	3911	1	$158.99	$158.99
Grey Pneumatic 81259CRD	59-piece 3/8" drive socket set, 5/16" - 1" and 7mm - 22mm, shallow and deep, 12 pt.	81259CRD	1	$149.79	$149.79
Snap-On FHOF80	Snap-On 3/8" drive ratchet, offset flex-head, soft-grip Dual80	FHOF80	1	$127.95	$127.95
Snap-On FHBF80	Snap-On 3/8" drive ratchet, bent flex-head, soft-grip Dual80	FHBF80	1	$127.95	$127.95
Bondhus 30887	3/8" drive 8-piece metric 6" long ProHold hex bit socket set, 3mm - 10mm	30887	1	$96.84	$96.84
Snap-On FHR80	Snap-On 3/8" drive ratchet, quick-release, soft-grip Dual80	FHR80	1	$89.95	$89.95
VIM HXLM100	14-piece 3/8" drive extra long hex bit set, ball and regular, 3mm - 10mm	HXLM100	1	$52.90	$52.90
VIM HXL100	14-piece 3/8" drive extra long hex bit set, ball and regular, 1/8" - 3/8"	HXL100	1	$52.90	$52.90
Facom J.161E	short reach palm control ratchet	J.161E	1	$50.00	$50.00
Bondhus 30845	3/8" drive 7-piece SAE 6" long ProHold hex bit socket set, 1/8" - 3/8"	30845	1	$49.99	$49.99
VIM VI600	8-piece 3/8" drive stubby impact hex bit set, 1/4" - 3/4"	VI600	1	$20.07	$20.07
Wera 8795 B	Wera 3/8" universal	05003585001	1	$16.91	$16.91
Total					$994.24

1/4" Drive

Part	Description	P/N	Qty.	Unit Price	Total
Grey Pneumatic 89253CRD	53-piece 1/4" drive socket set, 3/16" - 9/16" and 4mm - 15mm, shallow and deep, 12 pt.	89253CRD	1	$120.89	$120.89
Snap-On TF72	Snap-On 1/4" drive, long flex-head ratchet	TF72	1	$82.25	$82.25
Snap-On THR72	Snap-On 1/4" drive comfort grip quick-release ratchet	THR72	1	$79.95	$79.95
Bondhus 30799	1/4" drive 9-piece 6" long ProHold Torx bit socket set, T8-T40	30799	1	$49.99	$49.99
EZ-Red SR14	1/4" drive ratchet with rotating handle	SR14	1	$49.49	$49.49
Snap-On TMR860	Snap-On 1/4" drive finger ratchet	TMR860	1	$41.75	$41.75
VIM SHI400	9-piece 1/4" drive stubby hex bit set, 3/32" - 3/8"	SHI400	1	$17.15	$17.15
Wera 8795 A	Wera 1/4" universal joint	05003528001	1	$15.13	$15.13
Total					$456.60

1/2" Drive

Part	Description	P/N	Qty.	Unit Price	Total
Snap-On SHLF80A	Snap-On 1/2" drive Dual80 ratchet, flex-head, 25.75", comfort grip	SHLF80A	1	$210.00	$210.00
Snap-On SHF80A	Snap-On 1/2" drive Dual80 ratchet, flex-head, 17.6875", comfort grip	SHF80A	1	$188.00	$188.00
Grey Pneumatic 82229MD	29-piece 1/2" drive socket set, 10mm - 36mm, deep, 12 pt.	82229MD	1	$171.89	$171.89
Snap-On SH80A	Snap-On 1/2" drive Dual80 ratchet, comfort grip	SH80A	1	$154.00	$154.00
Grey Pneumatic 82222D	22-piece 1/2" drive socket set, 3/8" - 1.5", deep, 12 pt.	82222	1	$144.99	$144.99
Grey Pneumatic 82622D	22-piece 1/2" drive socket set, 3/8" - 1.5", deep, 6 pt.	82622D	1	$143.19	$143.19
Grey Pneumatic 82229M	29-piece 1/2" drive socket set, 10mm - 36mm, shallow, 12 pt.	82229M	1	$138.89	$138.89
Grey Pneumatic 1726MD	1/2" drive 12-point deep metric master impact socket set	1726MD	1	$134.99	$134.99
Grey Pneumatic 1326MD	1/2" drive 12-point deep metric master impact socket set	1326MD	1	$127.59	$127.59
Grey Pneumatic 82222	22-piece 1/2" drive socket set, 3/8" - 1.5", shallow, 12 pt.	82222	1	$119.39	$119.39
Snap-On SN18B	18" breaker bar	SN18B	1	$95.25	$95.25
Grey Pneumatic 1726M	1/2" drive 12-point standard length metric master impact socket set	1726M	1	$73.19	$73.19
Grey Pneumatic 1326M	1/2" drive 6-point standard length metric master impact socket set	1326M	1	$71.39	$71.39
Wera 8795 C	Wera 1/2" drive universal	05003640001	1	$22.25	$22.25
VIM MR16B16C	16" Magrail TL, blue with 16 1/2" studs	MR16B16C	6	$17.49	$104.94
Snap-On SH936-12O	Snap-On 1/2" SoftGrip, orange	SH936-12O	3	$8.65	$25.95
Grey Pneumatic 2017MTP	1/2" drive extra-thin wall 17mm wheel/nut protector socket	2017MTP	2	$7.89	$15.78
Grey Pneumatic 2024TP	1/2" drive extra-thin wall 3/4" wheel/nut protector socket set	2024TP	1	$6.79	$6.79
Total					$1948.47

1/4" Hex Drive

Part	Description	P/N	Qty.	Unit Price	Total
Wera 7440/41/42	adjustable torque driver set, 0.3 - 6.0 Nm, 27-piece, 1/4" hex-drive	7440/41/42	1	$234.99	$234.99
Wera 05057122001	Wera 8600/889-60 TZ bit safe (61 pieces)	05057122001	1	$101.80	$101.80
Wera 05056948001	Kraftform Ratchet 98/4/1, 889/4/1 Rapidaptor, bits, case	05056948001	1	$84.65	$84.65
Snap-On SSDMRT1O	stubby ratcheting T-handle screwdriver, orange	SSDMRT1O	1	$56.50	$56.50
VIM Tools VIS112	Master ball-end set: T10-T55, 3/32" - 3/8" hex, 2mm - 10mm hex	VIS112	1	$54.00	$54.00
Snap-On SSDMR1AO	stubby ratcheting screwdriver, orange	SSDMR1AO	1	$51.50	$51.50
Wera 05051461001	Kraftform 816/RA ratcheting handle with rapidaptor	05051461001	1	$45.00	$45.00
Wiha 71990	39-piece security bit set with driver	71990	1	$43.03	$43.03
Wera 05002901001	Kraftform Vario ratcheting handle for Vario 6mmm blades	05002901001	1	$32.85	$32.85
VIM Tools FR100	Finger ratchets for 1/4" sockets, 3/8" sockets and 1/4" bits	FR100	1	$31.93	$31.93
Wera 05135956001	BiTorsion Rapidaptor 897/4 R and diamond-coated Bit-Check	05135956001	1	$31.34	$31.34
Wera 05056652001	Kraftform Kompakt 11, Rapidaptor, small Torx bits	05056652001	1	$28.41	$28.41
VIM Tools HDMSET	Finger bit holders, magnetic	HDMSET	1	$18.42	$18.42
Snap-On SGDMRC4-TM4	1/4" square drive shank, 5"	SGDMRC4-TM4	1	$16.20	$16.20
Mechanics Time Savers MTS584	Magnetic bit holder for 37 bits, solar orange	MTS584	2	$11.95	$23.90
Wera 870/1	1/4" hex drive to 1/4" square drive adapter	870/1	1	$9.07	$9.07
Total					$863.59

Wera Stainless Torx Drivers

Part	Description	P/N	Qty.	Unit Price	Total
Wera 05032057002	Wera 3367 Torx stainless TX30x115mm	05032057002	1	$10.03	$10.03
Wera 05032056002	Wera 3367 Torx stainless TX27x115mm	05032056002	1	$9.54	$9.54
Wera 05032055002	Wera 3367 Torx stainless TX25x100mm	05032055002	1	$8.72	$8.72
Wera 05032054002	Wera 3367 Torx stainless TX20x100mm	05032054002	1	$8.16	$8.16
Wera 05032053002	Wera 3367 Torx stainless TX15x80mm	05032053002	1	$8.04	$8.04
Wera 05032052002	Wera 3367 Torx stainless TX10x80mm	05032052002	1	$7.96	$7.96
Wera 05032050002	Wera 3367 Torx stainless TX8x60mm	05032050002	1	$7.48	$7.48
Wera 05032051002	Wera 3367 Torx stainless TX9x60mm	05032051002	1	$7.48	$7.48
Total					$67.41

Wera Slotted Chisel Drivers

Part Description P/N Qty. Unit Price Total

Wera 05018274001 Wera 932A ChiselDriver slotted 2.5x14x250mm 05018274001 1 $33.04 $33.04

Total $33.04

Part	Description	P/N	Qty.	Unit Price	Total
Wera 05018274001	Wera 932A ChiselDriver slotted 2.5x14x250mm	05018274001	1	$33.04	$33.04
Total	$33.04

Hooks and Picks

Part Description P/N Qty. Unit Price Total

Mayhew 60002 Dominator professional hook set 60002 1 $82.88 $82.88

Snap-On SGSR104 4-piece seal remover set SGSR104 1 $41.20 $41.20

Total $124.08

Part	Description	P/N	Qty.	Unit Price	Total
Mayhew 60002	Dominator professional hook set	60002	1	$82.88	$82.88
Snap-On SGSR104	4-piece seal remover set	SGSR104	1	$41.20	$41.20
Total	$124.08

Pry Bars

Part Description P/N Qty. Unit Price Total

Mayhew 66302 Catspaw 4-piece curved-tip pry bar set 66302 1 $35.68 $35.68

Total $35.68

Part	Description	P/N	Qty.	Unit Price	Total
Mayhew 66302	Catspaw 4-piece curved-tip pry bar set	66302	1	$35.68	$35.68
Total	$35.68

Chisels and Punches

Part Description P/N Qty. Unit Price Total

Wilde K20.NP 20-piece master mechanics punch and chisel set K20.NP 1 $105.46 $105.46

Total $105.46

Part	Description	P/N	Qty.	Unit Price	Total
Wilde K20.NP	20-piece master mechanics punch and chisel set	K20.NP	1	$105.46	$105.46
Total	$105.46

Screwdrivers

Part	Description	P/N	Qty.	Unit Price	Total
Wera 05007680001	Wera 334 SK/6 Lasertip set, hex shank, 4 slotted + 2 Phillips	05007680001	1	$40.60	$40.60
Wera 05051461001	Wera 816 RA ratcheting handle with rapidaptor	05051461001	1	$38.25	$38.25
Wera 05008753001	Wera 350 SK PH Phillips #3	05008753001	1	$15.47	$15.47
Wera 05060050001	Wera 867/4Z Torx BO (security) blade TX10 X 89mm	05060050001	1	$7.67	$7.67
Wera 05060056001	Wera 867/4Z Torx BO (security) blade TX40 X 89mm	05060056001	1	$7.67	$7.67
Wera 05060054001	Wera 867/4Z Torx BO (security) blade TX30 X 89mm	05060054001	1	$7.67	$7.67
Wera 05060057001	Wera 867/4Z Torx BO (security) blade TX27 X 89mm	05060057001	1	$7.67	$7.67
Wera 05060053001	Wera 867/4Z Torx BO (security) blade TX25 X 89mm	05060053001	1	$7.67	$7.67
Wera 05060052001	Wera 867/4Z Torx BO (security) blade TX20 X 89mm	05060052001	1	$7.67	$7.67
Wera 05060051001	Wera 867/4Z Torx BO (security) blade TX15 X 89mm	05060051001	1	$7.67	$7.67
Wera 05060048001	Wera 867/4Z Torx BO (security) blade TX8 X 89mm	05060048001	1	$7.67	$7.67
Wera 05008750001	Wera 350 SK PH Phillips #0	05008750001	1	$6.46	$6.46
Wera 05060201001	Wera 867/4Z Torx blade TX30 X 152mm	05060201001	1	$6.09	$6.09
Wera 05060200001	Wera 867/4Z Torx blade TX27 X 152mm	05060200001	1	$6.09	$6.09
Wera 05060199001	Wera 867/4Z Torx blade TX25 X 152mm	05060199001	1	$6.09	$6.09
Wera 05060198001	Wera 867/4Z Torx blade TX20 X 152mm	05060198001	1	$6.09	$6.09
Wera 05060197001	Wera 867/4Z Torx blade TX15 X 152mm	05060197001	1	$6.09	$6.09
Wera 05060196001	Wera 867/4Z Torx blade TX10 X 152mm	05060196001	1	$6.09	$6.09
Wera 05060195001	Wera 867/4Z Torx blade TX8 X 152mm	05060195001	1	$6.09	$6.09
Wera 05110078001	Wera stubby slotted 1.2mm x 8.0mm	05110078001	1	$4.37	$4.37
Wera 05008782001	Wera stubby Phillips #3	05008782001	1	$3.54	$3.54
Total					$212.68

Pliers

Part	Description	P/N	Qty.	Unit Price	Total
Grip-On GK500	locking pliers, 5 piece set	GK500	1	$100.00	$100.00
Knipex 3X8702	Knipex 3-piece Ergo Grip Cobra set	3X8702	1	$88.00	$88.00
Craftsman 47394	3-piece retaining ring plier set in blow-molded case	47394	1	$79.99	$79.99
Bahco 2753-9	Bahco 9.5" side-cutting rebar pliers	2753-9	1	$45.00	$45.00
Bahco 2979D-180	7" nut pliers	2979D-180	1	$43.21	$43.21
Knipex 38 35 200	Knipex S-shape 8 in. long nose pliers.	38 35 200	1	$40.61	$40.61
Grip-On 80857	ErgoGrip 70-degree locking pliers	80857	1	$40.00	$40.00
Knipex 31 25 160	Knipex angled needle nose pliers, 6.25 in.	31 25 160	1	$38.90	$38.90
NWS 138-69-200	NWS Fantastico Plus Heavy Duty Lever Side Cutter 200 mm	138-69-200	1	$35.63	$35.63
Knipex 38 91 200	Knipex 8 in. long-nose grabber	3891200	1	$31.59	$31.59
Knipex 26 22 200	Knipex angled needle nose pliers, 8 in.	26 22 200	1	$29.83	$29.83
NWS 128G-52-215	NWS 215mm angled mechanic's pliers	128G-52-215	1	$29.65	$29.65
Knipex 26 12 200 D4A	Knipex 8" comfort grip long-nose pliers with cutter	26 12 200 D4A	1	$28.97	$28.97
Bahco 2427G-200	60-degree curved nose pliers, ergo grip, 7"	2427G-200	1	$24.11	$24.11
Bahco 2533-8	Long nose pliers, ergo grip, 8"	2533-8	1	$20.78	$20.78
NWS 124-69-150	NWS 160mm long flat nose pliers	124-69-150	1	$20.67	$20.67
Knipex 8701 125	Knipex Micro Cobra	8701 125	1	$19.69	$19.69
Bahco 2628G-180	7" ergo combination plier	2628G-180	1	$18.90	$18.90
Bahco 2628G-160	6.25" ergo combination plier	2628G-160	1	$17.77	$17.77
Bahco 2430G-140	Nose pliers, ergo grip, 5.5"	2430G-140	1	$13.09	$13.09
Bahco 2420G-125	Flat-nose pliers, ergo grip, 5"	2420G-125	1	$13.09	$13.09
Total					$779.48

Wire/Cable/Bolt cutters

Part	Description	P/N	Qty.	Unit Price	Total
NWS 1311-69-200	NWS PowerBolt Fantastico End Cutter	1311-69-200	1	$39.87	$39.87
NWS 138-69-200	NWS Fantastico Plus Heavy Duty Lever Side Cutter 200 mm	138-69-200	1	$35.63	$35.63
Total					$75.50

Wrenches

Part	Description	P/N	Qty.	Unit Price	Total
Facom 440.JU17T	17-piece fractional combination wrench set, 1/4" - 1.25"	440.JU17T	1	$235.00	$235.00
Gearwrench 85989	17-piece metric GearBox master set, 8mm-22mm, 24mm, 25mm	85989	1	$234.95	$234.95
Toptul GPAA2602	26-piece long combination wrench set, 6-32mm	GPAA2602	1	$169.99	$169.99
KD 85988	12-piece gear box (box end and ratcheting end) XXL set, 8-19mm	85988	1	$150.00	$150.00
Williams MWS-12RCF	12-piece flex-head reversible ratcheting set, 8mm - 19mm	MWS-12RCF	1	$141.28	$141.28
Stahlwille STW20/8	8 piece extra deep offset wrench set, 6mm - 20mm	STW20/8	1	$133.99	$133.99
E-Z Red NR5M	5-piece extra long flex-head ratcheting spline wrenches	NR5M	1	$123.99	$123.99
Knipex 3X8605	3-piece pliers wrench set, comfort grip	3X8605	1	$123.77	$123.77
GearWrench 85288	12-piece flex X-Beam combination ratcheting set, 8mm - 19mm	85288	1	$123.00	$123.00
GearWrench 9550	10-piece flex stubby combination ratcheting set, 10mm - 19mm	9550	1	$120.00	$120.00
SK 86188	8-piece 12-point SuperKrome short deep metric offset box wrench set, 6mm - 20mm	86188	1	$119.99	$119.99
Toptul GPBA1601	16-piece long combination wrench set, 1/4" - 1.25"	GPBA1601	1	$114.99	$114.99
Gearwrench 85999	13-piece SAE GearBox master set, 5/16" - 1"	85999	1	$109.00	$109.00
Gearwrench 85399	4-piece SAE S-shape reversible ratcheting set, 3/8" - 7/8"	85399	1	$92.99	$92.99
GearWrench 9903	4-piece metric flex-head ratcheting combination completer set: 21mm, 22mm, 24mm, 25mm	9903	1	$80.35	$80.35
Toptul GPAI1202	12-piece metric 75-degree offset double box wrench set	GPAF1001	1	$74.99	$74.99
Williams MWS-4RC	4-piece combination reversible ratcheting set, 21mm, 22mm, 24mm, 25mm	MWS-4RC	1	$66.85	$66.85
Knipex 86 03 300	12-inch pliers wrench	86 03 300	1	$61.99	$61.99
Gearwrench 9240	4-piece SAE double box end ratcheting set, 5/16" - 3/4"	9240	1	$43.95	$43.95
Wright 788	10-piece miniature metric combination wrench set, 4mm - 11mm	788	1	$31.99	$31.99
GearWrench 9716	1" flex-head ratcheting combination wrench	9716	1	$29.79	$29.79
GearWrench 9715	15/16" flex-head ratcheting combination wrench	9715	1	$29.79	$29.79
GearWrench 9714	7/8" flex-head ratcheting combination wrench	9714	1	$24.88	$24.88
GearWrench 9713	13/16" flex-head ratcheting combination wrench	9713	1	$24.88	$24.88
GearWrench 9704	11/32" flex-head ratcheting combination wrench	9704	1	$19.00	$19.00
GearWrench 9705	5/16" flex-head ratcheting combination wrench	9705	1	$13.13	$13.13
Total					$2494.53

Hammers

Part	Description	P/N	Qty.	Unit Price	Total
Estwing ball peen hammer set	5-piece ball peen hammer set (8oz, 12oz, 16oz, 24oz, 32oz)	E3-8-24BP	1	$115.00	$115.00
Astro Pneumatic 5520	3-piece deadblow ball peen hammer set (16oz, 32oz, 40oz)	5520	1	$75.00	$75.00
Snap-On HBFE32	13.5" long, 32 oz. dead blow soft-grip hammer	HBFE32	1	$51.40	$51.40
Total					$241.40

Power Tools

Part	Description	P/N	Qty.	Unit Price	Total
Milwaukee 2662-22	1/2" drive 18V impact wrench with pin anvil	2662-22	1	$379.99	$379.99
Dynabrade 69010	6" Silver Supreme 3/8" orbit random orbital	69010	1	$169.95	$169.95
Bosch CC2130	Clic-Change 27-piece drilling and driving set	CC2130	1	$149.00	$149.00
Ingersoll-Rand 3128K	3" pneumatic random orbital	3128K	1	$107.99	$107.99
Tanos Systainer II	Tanos Systainer II with lid sort tray)	Tanos Systainer II	1	$74.00	$74.00
Ingersoll-Rand HXNSK-9M	metric nut setter set, 5.5-13mm	HXNSK-9M	1	$29.99	$29.99
VIM NMS100	metric nut setter master set, 8mm, 10-14mm (magnetic and hollow)	NSM100-03	1	$28.13	$28.13
VIM DAHLDR2-RED	magnetic base DA sander holder for 2 sanders	DAHLDR2-RED	2	$24.94	$49.88
Neiko 10065A	metric nut setter set, 6-13mm	10065A	1	$8.95	$8.95
Milwaukee 48-32-5032	1/4" hex to 1/2" socket drive adapter	48-32-5032	2	$3.99	$7.98
Milwaukee 48-32-5031	1/4" hex to 3/8" socket drive adapter	48-32-5031	2	$3.49	$6.98
Milwaukee 48-32-5030	1/4" hex to 1/4" socket drive adapter	48-32-5030	2	$2.99	$5.98
Total					$1018.82

Air Tools

Part	Description	P/N	Qty.	Unit Price	Total
Ingersoll-Rand 2025MAX	3/8" drive impact ratchet, 180 ft-lbs	2025MAX	1	$262.99	$262.99
Ingersoll-Rand 3102	90-degree die grinder	3102	1	$109.00	$109.00
Ingersoll-Rand 3108	straight die grinder	3108	1	$109.00	$109.00
Aircat ACR801R	3/8" drive air ratchet, short, 35 ft-lbs	ACR801R	1	$92.50	$92.50
Griot's 10977	3" pneumatic random orbital	10977	1	$79.99	$79.99
Aircat ACR802R	3/8" drive air ratchet, 70 ft-lbs	ACR802R	1	$78.99	$78.99
Aircat ACR800	1/4" drive air ratchet	ACR800	1	$74.05	$74.05
Northern Tool 426268	14-piece blow gun kit	426268	1	$18.00	$18.00
Northern Tool 1591450	telescopic air blow gun	1591450	1	$10.00	$10.00
Milton S-138	blow gun with rubber tip and hook	S-138	1	$10.00	$10.00
Total					$844.52

L-keys

Part	Description	P/N	Qty.	Unit Price	Total
Bondhus 32432	Tamper-proof Torx key set, T6-T25	32432	1	$22.99	$22.99
Bondhus 32434	Tamper-proof Torx key set, T9-T40	32434	1	$19.64	$19.64
Bondhus 31832	Torx key set, T6-T25	31832	1	$15.05	$15.05
Total					$57.68

BMW Tools

Part	Description	P/N	Qty.	Unit Price	Total
BMW 83.30.0.490.959	(formerly 90.88.6.114.380) camshaft press-down tool	BMW 83300490959	1	$604.00	$604.00
BMW 83300491148	(90.88.6.126.410) used with 83300493429 for external operation of VANOS adjustment unit	83300491148	1	$168.88	$168.88
BMW 83300493429	(90.88.6.126.050) switching unit for activating solenoids in VANOS	83300493429	1	$162.39	$162.39
BMW 90.88.6.119.130	camshaft setting gauge, needs 90.88.6.117.342	90886119130	1	$112.80	$112.80
BMW 83300493750	(90.88.6.119.140) camshaft timing gauge	83300493750	1	$97.18	$97.18
BMW 90.88.6.121.120	for unlocking edge connector on fuel injectors	90886121120	1	$32.13	$32.13
BMW 83.30.0.493.430	(90.88.6.117.130) for compressed air to VANOS	83300493430	1	$28.94	$28.94
BMW 83.30.0.490.861	(88.88.6.112.300) for securing crank position via vibration damper	83300490861	1	$23.76	$23.76
BMW 90.88.6.117.342	camshaft setting gauge, needs 90.88.6.119.130	90886117342	1	$13.36	$13.36
Total					$1243.44

Other

Part	Description	P/N	Qty.	Unit Price	Total
26" toolbox cover	zippered toolbox cover for Craftsman 26" toolboxes	toolboxcover26	2	$143.01	$286.02
SK 4508	SAE crowfoot flare set, 3/8" drive, 3/8" - 1"	4508	1	$128.00	$128.00
KD 41690	front end service kit	41690	1	$78.99	$78.99
orange neoprene foam	tool drawer liner, 2mm thick	2mmNeopreneFoam	1	$75.60	$75.60
VIM XZNS1000	XZN sockets in Magrail TL organizer	XZNS1000	1	$52.80	$52.80
GearWrench 80580	12-piece hex bit socket set, 2-12mm	80580	1	$44.62	$44.62
GearWrench 80725	13-piece Torx Tamper-Proof socket set	80725	1	$43.61	$43.61
Donegan OptiVISOR DA-7 with LP-1 loupe	glass lens 2.75X magnifying visor	DA-7, LP-1	1	$39.48	$39.48
GearWrench 80720	7-piece hex bit socket set, 6-19mm	80720	1	$37.43	$37.43
GearWrench 80723	13-piece Torx socket set	80723	1	$34.90	$34.90
Blue-Point VT1A	valve stem inserter	VT1A	1	$31.70	$31.70
26" toolbox cover no zippers	toolbox cover for Craftsman 26" toolboxes, marine-grade nylon	dustcover26	2	$30.00	$60.00
Bahco 325	12" ergo hacksaw	325	1	$28.11	$28.11
Bondhus 48492	6-12mm hollow shaft nut drivers	48492	1	$24.42	$24.42
SensGard Zem	hearing protection	ZM1	2	$19.99	$39.98
Custom LeatherCraft 140L	framer's glove, large	140L	1	$16.57	$16.57
Youngstown 03-3110-80-M	carpenter's glove, gray	03-3110-80-M	1	$16.30	$16.30
Occunomix 481W-044	framer's glove, large	481W-044	1	$16.30	$16.30
Menda 35335	4 oz. one-touch solvent dispenser, metal can	35335	1	$15.08	$15.08
Custom Leathercraft 5021	impact driver holster for 12V impact driver	5021	1	$7.99	$7.99
Bondhus 48482	13mm hollow shaft nut driver	48482	1	$5.84	$5.84
Bahco 302-35	tube cutter	302-35	1	$0.00	$0.00
Bahco 1084	mini tube bender	1084	1	$0.00	$0.00
Williams 43621	mini tube bender	43621	1	$0.00	$0.00
Total					$1083.74

Totals by Category

Category	Total
Systainers	$477.00
Small rolling toolboxes	$238.00
Clamps	$1086.00
3/8" Drive	$994.24
1/4" Drive	$456.60
1/2" Drive	$1948.47
1/4" Hex Drive	$863.59
Wera Stainless Torx Drivers	$67.41
Wera Slotted Chisel Drivers	$33.04
Hooks and Picks	$124.08
Pry Bars	$35.68
Chisels and Punches	$105.46
Screwdrivers	$212.68
Pliers	$779.48
Wire/Cable/Bolt cutters	$75.50
Wrenches	$2494.53
Hammers	$241.40
Power Tools	$1018.82
Air Tools	$844.52
L-keys	$57.68
BMW Tools	$1243.44
Other	$1083.74
Total	$14481.36

Tools by Vendor

www.amazon.com

Part	Description	P/N	Qty.	Unit Price	Total
Wera 7440/41/42	adjustable torque driver set, 0.3 - 6.0 Nm, 27-piece, 1/4" hex-drive	7440/41/42	1	$234.99	$234.99
Gearwrench 85989	17-piece metric GearBox master set, 8mm-22mm, 24mm, 25mm	85989	1	$234.95	$234.95
KD 85988	12-piece gear box (box end and ratcheting end) XXL set, 8-19mm	85988	1	$150.00	$150.00
Bosch CC2130	Clic-Change 27-piece drilling and driving set	CC2130	1	$149.00	$149.00
Gearwrench 85999	13-piece SAE GearBox master set, 5/16" - 1"	85999	1	$109.00	$109.00
Grip-On GK500	locking pliers, 5 piece set	GK500	1	$100.00	$100.00
Bondhus 30887	3/8" drive 8-piece metric 6" long ProHold hex bit socket set, 3mm - 10mm	30887	1	$96.84	$96.84
Aircat ACR801R	3/8" drive air ratchet, short, 35 ft-lbs	ACR801R	1	$92.50	$92.50
Festool Systainer 5 T-Loc for strong detailing sprays	12" deep	497567	0	$86.00	$0.00
Mayhew 60002	Dominator professional hook set	60002	1	$82.88	$82.88
Festool Systainer cart	mobile base for Systainers	492388	1	$81.00	$81.00
Festool Systainer 4 T-Loc for detailing stuff, battery chargers	12" deep	497566	4	$80.00	$320.00
Festool Systainer 3 T-Loc for detailing stuff	8" deep	497565	1	$76.00	$76.00
Aircat ACR800	1/4" drive air ratchet	ACR800	1	$74.05	$74.05
Festool Systainer 1 T-Loc for detailing clay	4" deep	497563	0	$63.00	$0.00
Knipex 86 03 300	12-inch pliers wrench	86 03 300	1	$61.99	$61.99
Bondhus 30845	3/8" drive 7-piece SAE 6" long ProHold hex bit socket set, 1/8" - 3/8"	30845	1	$49.99	$49.99
Bondhus 30799	1/4" drive 9-piece 6" long ProHold Torx bit socket set, T8-T40	30799	1	$49.99	$49.99
EZ-Red SR14	1/4" drive ratchet with rotating handle	SR14	1	$49.49	$49.49
Bahco 2753-9	Bahco 9.5" side-cutting rebar pliers	2753-9	1	$45.00	$45.00
Wiha 71990	39-piece security bit set with driver	71990	1	$43.03	$43.03
Donegan OptiVISOR DA-7 with LP-1 loupe	glass lens 2.75X magnifying visor	DA-7, LP-1	1	$39.48	$39.48
Knipex 31 25 160	Knipex angled needle nose pliers, 6.25 in.	31 25 160	1	$38.90	$38.90
Mayhew 66302	Catspaw 4-piece curved-tip pry bar set	66302	1	$35.68	$35.68
Knipex 38 91 200	Knipex 8 in. long-nose grabber	3891200	1	$31.59	$31.59
Knipex 26 22 200	Knipex angled needle nose pliers, 8 in.	26 22 200	1	$29.83	$29.83
VIM NMS100	metric nut setter master set, 8mm, 10-14mm (magnetic and hollow)	NSM100-03	1	$28.13	$28.13
Bondhus 48492	6-12mm hollow shaft nut drivers	48492	1	$24.42	$24.42
GearWrench 9704	11/32" flex-head ratcheting combination wrench	9704	1	$19.00	$19.00
Custom LeatherCraft 140L	framer's glove, large	140L	1	$16.57	$16.57
Youngstown 03-3110-80-M	carpenter's glove, gray	03-3110-80-M	1	$16.30	$16.30
Neiko 10065A	metric nut setter set, 6-13mm	10065A	1	$8.95	$8.95
Custom Leathercraft 5021	impact driver holster for 12V impact driver	5021	1	$7.99	$7.99
Bondhus 48482	13mm hollow shaft nut driver	48482	1	$5.84	$5.84
Total					$2403.38

www.homedepot.com

Part	Description	P/N	Qty.	Unit Price	Total
Toolstud 10.5"	adjustable-height rolling cantilever toolbox	202018275	2	$119.00	$238.00
Milwaukee 48-32-5032	1/4" hex to 1/2" socket drive adapter	48-32-5032	2	$3.99	$7.98
Milwaukee 48-32-5031	1/4" hex to 3/8" socket drive adapter	48-32-5031	2	$3.49	$6.98
Milwaukee 48-32-5030	1/4" hex to 1/4" socket drive adapter	48-32-5030	2	$2.99	$5.98
Total					$258.94

www.toolbarn.com

Part	Description	P/N	Qty.	Unit Price	Total
Grey Pneumatic 82229MD	29-piece 1/2" drive socket set, 10mm - 36mm, deep, 12 pt.	82229MD	1	$171.89	$171.89
Grey Pneumatic 81259CRD	59-piece 3/8" drive socket set, 5/16" - 1" and 7mm - 22mm, shallow and deep, 12 pt.	81259CRD	1	$149.79	$149.79
Grey Pneumatic 82222D	22-piece 1/2" drive socket set, 3/8" - 1.5", deep, 12 pt.	82222	1	$144.99	$144.99
Grey Pneumatic 82622D	22-piece 1/2" drive socket set, 3/8" - 1.5", deep, 6 pt.	82622D	1	$143.19	$143.19
Grey Pneumatic 82229M	29-piece 1/2" drive socket set, 10mm - 36mm, shallow, 12 pt.	82229M	1	$138.89	$138.89
Grey Pneumatic 1726MD	1/2" drive 12-point deep metric master impact socket set	1726MD	1	$134.99	$134.99
Grey Pneumatic 1326MD	1/2" drive 12-point deep metric master impact socket set	1326MD	1	$127.59	$127.59
Grey Pneumatic 89253CRD	53-piece 1/4" drive socket set, 3/16" - 9/16" and 4mm - 15mm, shallow and deep, 12 pt.	89253CRD	1	$120.89	$120.89
Grey Pneumatic 82222	22-piece 1/2" drive socket set, 3/8" - 1.5", shallow, 12 pt.	82222	1	$119.39	$119.39
Wilton 14299	12" C-clamp, drop-forged, 6.3125" throat depth, copper plated spindle	14299	2	$119.00	$238.00
Grey Pneumatic 1726M	1/2" drive 12-point standard length metric master impact socket set	1726M	1	$73.19	$73.19
Grey Pneumatic 1326M	1/2" drive 6-point standard length metric master impact socket set	1326M	1	$71.39	$71.39
Wilton 14271	8" C-clamp, drop-forged, 5" throat depth, copper plated spindle	14271	4	$49.00	$196.00
Wilton 14257	6" C-clamp, drop-forged, 4.125" throat depth, copper plated spindle	14257	4	$39.00	$156.00
Irwin 2021450N	50" Quick-Grip XP one-handed bar clamp	2021450N	4	$37.00	$148.00
Irwin 2021463	36" Quick-Grip XP one-handed bar clamp	2021463	4	$33.00	$132.00
Irwin 2021424N	24" Quick-Grip XP one-handed bar clamp	2021424N	4	$29.00	$116.00
Wilton 14243	4" C-clamp, drop-forged, 3.25" throat depth, copper plated spindle	14243	4	$25.00	$100.00
Grey Pneumatic 2017MTP	1/2" drive extra-thin wall 17mm wheel/nut protector socket	2017MTP	2	$7.89	$15.78
Grey Pneumatic 2024TP	1/2" drive extra-thin wall 3/4" wheel/nut protector socket set	2024TP	1	$6.79	$6.79
Total					$2504.76

www.tooltopia.com

Part	Description	P/N	Qty.	Unit Price	Total
Ingersoll-Rand 2025MAX	3/8" drive impact ratchet, 180 ft-lbs	2025MAX	1	$262.99	$262.99
SK 3911	3/8" drive 10-piece metric flex socket set, 10mm - 19mm	3911	1	$158.99	$158.99
Stahlwille STW20/8	8 piece extra deep offset wrench set, 6mm - 20mm	STW20/8	1	$133.99	$133.99
SK 4508	SAE crowfoot flare set, 3/8" drive, 3/8" - 1"	4508	1	$128.00	$128.00
E-Z Red NR5M	5-piece extra long flex-head ratcheting spline wrenches	NR5M	1	$123.99	$123.99
GearWrench 85288	12-piece flex X-Beam combination ratcheting set, 8mm - 19mm	85288	1	$123.00	$123.00
GearWrench 9550	10-piece flex stubby combination ratcheting set, 10mm - 19mm	9550	1	$120.00	$120.00
SK 86188	8-piece 12-point SuperKrome short deep metric offset box wrench set, 6mm - 20mm	86188	1	$119.99	$119.99
Gearwrench 85399	4-piece SAE S-shape reversible ratcheting set, 3/8" - 7/8"	85399	1	$92.99	$92.99
GearWrench 9903	4-piece metric flex-head ratcheting combination completer set: 21mm, 22mm, 24mm, 25mm	9903	1	$80.35	$80.35
KD 41690	front end service kit	41690	1	$78.99	$78.99
Aircat ACR802R	3/8" drive air ratchet, 70 ft-lbs	ACR802R	1	$78.99	$78.99
Astro Pneumatic 5520	3-piece deadblow ball peen hammer set (16oz, 32oz, 40oz)	5520	1	$75.00	$75.00
VIM HXLM100	14-piece 3/8" drive extra long hex bit set, ball and regular, 3mm - 10mm	HXLM100	1	$52.90	$52.90
VIM HXL100	14-piece 3/8" drive extra long hex bit set, ball and regular, 1/8" - 3/8"	HXL100	1	$52.90	$52.90
VIM XZNS1000	XZN sockets in Magrail TL organizer	XZNS1000	1	$52.80	$52.80
GearWrench 80580	12-piece hex bit socket set, 2-12mm	80580	1	$44.62	$44.62
Gearwrench 9240	4-piece SAE double box end ratcheting set, 5/16" - 3/4"	9240	1	$43.95	$43.95
GearWrench 80725	13-piece Torx Tamper-Proof socket set	80725	1	$43.61	$43.61
GearWrench 80720	7-piece hex bit socket set, 6-19mm	80720	1	$37.43	$37.43
GearWrench 80723	13-piece Torx socket set	80723	1	$34.90	$34.90
Ingersoll-Rand HXNSK-9M	metric nut setter set, 5.5-13mm	HXNSK-9M	1	$29.99	$29.99
GearWrench 9716	1" flex-head ratcheting combination wrench	9716	1	$29.79	$29.79
GearWrench 9715	15/16" flex-head ratcheting combination wrench	9715	1	$29.79	$29.79
GearWrench 9713	13/16" flex-head ratcheting combination wrench	9713	1	$24.88	$24.88
GearWrench 9714	7/8" flex-head ratcheting combination wrench	9714	1	$24.88	$24.88
VIM VI600	8-piece 3/8" drive stubby impact hex bit set, 1/4" - 3/4"	VI600	1	$20.07	$20.07
VIM SHI400	9-piece 1/4" drive stubby hex bit set, 3/32" - 3/8"	SHI400	1	$17.15	$17.15
GearWrench 9705	5/16" flex-head ratcheting combination wrench	9705	1	$13.13	$13.13
Mechanics Time Savers MTS584	Magnetic bit holder for 37 bits, solar orange	MTS584	2	$11.95	$23.90
Total					$2153.96

buy1.snapon.com

Part	Description	P/N	Qty.	Unit Price	Total
Snap-On SHLF80A	Snap-On 1/2" drive Dual80 ratchet, flex-head, 25.75", comfort grip	SHLF80A	1	$210.00	$210.00
Snap-On SHF80A	Snap-On 1/2" drive Dual80 ratchet, flex-head, 17.6875", comfort grip	SHF80A	1	$188.00	$188.00
Snap-On SH80A	Snap-On 1/2" drive Dual80 ratchet, comfort grip	SH80A	1	$154.00	$154.00
Snap-On FHBF80	Snap-On 3/8" drive ratchet, bent flex-head, soft-grip Dual80	FHBF80	1	$127.95	$127.95
Snap-On FHOF80	Snap-On 3/8" drive ratchet, offset flex-head, soft-grip Dual80	FHOF80	1	$127.95	$127.95
Snap-On SN18B	18" breaker bar	SN18B	1	$95.25	$95.25
Snap-On FHR80	Snap-On 3/8" drive ratchet, quick-release, soft-grip Dual80	FHR80	1	$89.95	$89.95
Snap-On TF72	Snap-On 1/4" drive, long flex-head ratchet	TF72	1	$82.25	$82.25
Snap-On THR72	Snap-On 1/4" drive comfort grip quick-release ratchet	THR72	1	$79.95	$79.95
Snap-On SSDMRT1O	stubby ratcheting T-handle screwdriver, orange	SSDMRT1O	1	$56.50	$56.50
Snap-On SSDMR1AO	stubby ratcheting screwdriver, orange	SSDMR1AO	1	$51.50	$51.50
Snap-On HBFE32	13.5" long, 32 oz. dead blow soft-grip hammer	HBFE32	1	$51.40	$51.40
Snap-On TMR860	Snap-On 1/4" drive finger ratchet	TMR860	1	$41.75	$41.75
Snap-On SGSR104	4-piece seal remover set	SGSR104	1	$41.20	$41.20
Blue-Point VT1A	valve stem inserter	VT1A	1	$31.70	$31.70
Snap-On SGDMRC4-TM4	1/4" square drive shank, 5"	SGDMRC4-TM4	1	$16.20	$16.20
Snap-On SH936-12O	Snap-On 1/2" SoftGrip, orange	SH936-12O	3	$8.65	$25.95
Total					$1471.50

www.ultimategarage.com

Part	Description	P/N	Qty.	Unit Price	Total
Facom 440.JU17T	17-piece fractional combination wrench set, 1/4" - 1.25"	440.JU17T	1	$235.00	$235.00
Facom J.161E	short reach palm control ratchet	J.161E	1	$50.00	$50.00
Total					$285.00

chadstoolbox.com

Part	Description	P/N	Qty.	Unit Price	Total
Knipex 3X8605	3-piece pliers wrench set, comfort grip	3X8605	1	$123.77	$123.77
Wera 05057122001	Wera 8600/889-60 TZ bit safe (61 pieces)	05057122001	1	$101.80	$101.80
Knipex 3X8702	Knipex 3-piece Ergo Grip Cobra set	3X8702	1	$88.00	$88.00
Wera 05056948001	Kraftform Ratchet 98/4/1, 889/4/1 Rapidaptor, bits, case	05056948001	1	$84.65	$84.65
Knipex 38 35 200	Knipex S-shape 8 in. long nose pliers.	38 35 200	1	$40.61	$40.61
Wera 05007680001	Wera 334 SK/6 Lasertip set, hex shank, 4 slotted + 2 Phillips	05007680001	1	$40.60	$40.60
NWS 1311-69-200	NWS PowerBolt Fantastico End Cutter	1311-69-200	1	$39.87	$39.87
Wera 05051461001	Wera 816 RA ratcheting handle with rapidaptor	05051461001	1	$38.25	$38.25
NWS 138-69-200	NWS Fantastico Plus Heavy Duty Lever Side Cutter 200 mm	138-69-200	1	$35.63	$35.63
Wera 05018274001	Wera 932A ChiselDriver slotted 2.5x14x250mm	05018274001	1	$33.04	$33.04
Wera 05002901001	Kraftform Vario ratcheting handle for Vario 6mmm blades	05002901001	1	$32.85	$32.85
Wera 05135956001	BiTorsion Rapidaptor 897/4 R and diamond-coated Bit-Check	05135956001	1	$31.34	$31.34
NWS 128G-52-215	NWS 215mm angled mechanic's pliers	128G-52-215	1	$29.65	$29.65
Wera 05056652001	Kraftform Kompakt 11, Rapidaptor, small Torx bits	05056652001	1	$28.41	$28.41
Bondhus 32432	Tamper-proof Torx key set, T6-T25	32432	1	$22.99	$22.99
Wera 8795 C	Wera 1/2" drive universal	05003640001	1	$22.25	$22.25
NWS 124-69-150	NWS 160mm long flat nose pliers	124-69-150	1	$20.67	$20.67
SensGard Zem	hearing protection	ZM1	2	$19.99	$39.98
Knipex 8701 125	Knipex Micro Cobra	8701 125	1	$19.69	$19.69
Bondhus 32434	Tamper-proof Torx key set, T9-T40	32434	1	$19.64	$19.64
Wera 8795 B	Wera 3/8" universal	05003585001	1	$16.91	$16.91
Wera 05008753001	Wera 350 SK PH Phillips #3	05008753001	1	$15.47	$15.47
Wera 8795 A	Wera 1/4" universal joint	05003528001	1	$15.13	$15.13
Bondhus 31832	Torx key set, T6-T25	31832	1	$15.05	$15.05
Wera 05032057002	Wera 3367 Torx stainless TX30x115mm	05032057002	1	$10.03	$10.03
Wera 05032056002	Wera 3367 Torx stainless TX27x115mm	05032056002	1	$9.54	$9.54
Wera 870/1	1/4" hex drive to 1/4" square drive adapter	870/1	1	$9.07	$9.07
Wera 05032055002	Wera 3367 Torx stainless TX25x100mm	05032055002	1	$8.72	$8.72
Wera 05032054002	Wera 3367 Torx stainless TX20x100mm	05032054002	1	$8.16	$8.16
Wera 05032053002	Wera 3367 Torx stainless TX15x80mm	05032053002	1	$8.04	$8.04
Wera 05032052002	Wera 3367 Torx stainless TX10x80mm	05032052002	1	$7.96	$7.96
Wera 05060050001	Wera 867/4Z Torx BO (security) blade TX10 X 89mm	05060050001	1	$7.67	$7.67
Wera 05060056001	Wera 867/4Z Torx BO (security) blade TX40 X 89mm	05060056001	1	$7.67	$7.67
Wera 05060053001	Wera 867/4Z Torx BO (security) blade TX25 X 89mm	05060053001	1	$7.67	$7.67
Wera 05060054001	Wera 867/4Z Torx BO (security) blade TX30 X 89mm	05060054001	1	$7.67	$7.67
Wera 05060057001	Wera 867/4Z Torx BO (security) blade TX27 X 89mm	05060057001	1	$7.67	$7.67
Wera 05060052001	Wera 867/4Z Torx BO (security) blade TX20 X 89mm	05060052001	1	$7.67	$7.67
Wera 05060051001	Wera 867/4Z Torx BO (security) blade TX15 X 89mm	05060051001	1	$7.67	$7.67
Wera 05060048001	Wera 867/4Z Torx BO (security) blade TX8 X 89mm	05060048001	1	$7.67	$7.67
Wera 05032051002	Wera 3367 Torx stainless TX9x60mm	05032051002	1	$7.48	$7.48
Wera 05032050002	Wera 3367 Torx stainless TX8x60mm	05032050002	1	$7.48	$7.48
Wera 05008750001	Wera 350 SK PH Phillips #0	05008750001	1	$6.46	$6.46
Wera 05060197001	Wera 867/4Z Torx blade TX15 X 152mm	05060197001	1	$6.09	$6.09
Wera 05060200001	Wera 867/4Z Torx blade TX27 X 152mm	05060200001	1	$6.09	$6.09
Wera 05060201001	Wera 867/4Z Torx blade TX30 X 152mm	05060201001	1	$6.09	$6.09
Wera 05060196001	Wera 867/4Z Torx blade TX10 X 152mm	05060196001	1	$6.09	$6.09
Wera 05060199001	Wera 867/4Z Torx blade TX25 X 152mm	05060199001	1	$6.09	$6.09
Wera 05060198001	Wera 867/4Z Torx blade TX20 X 152mm	05060198001	1	$6.09	$6.09
Wera 05060195001	Wera 867/4Z Torx blade TX8 X 152mm	05060195001	1	$6.09	$6.09
Wera 05110078001	Wera stubby slotted 1.2mm x 8.0mm	05110078001	1	$4.37	$4.37
Wera 05008782001	Wera stubby Phillips #3	05008782001	1	$3.54	$3.54
Total					$1151.09

www.etoolpros.com

Part Description P/N Qty. Unit Price Total

VIM MR16B16C 16" Magrail TL, blue with 16 1/2" studs MR16B16C 6 $17.49 $104.94

Total $104.94

Part	Description	P/N	Qty.	Unit Price	Total
VIM MR16B16C	16" Magrail TL, blue with 16 1/2" studs	MR16B16C	6	$17.49	$104.94
Total	$104.94

www.vimtools.com

Part	Description	P/N	Qty.	Unit Price	Total
VIM Tools VIS112	Master ball-end set: T10-T55, 3/32" - 3/8" hex, 2mm - 10mm hex	VIS112	1	$54.00	$54.00
VIM Tools FR100	Finger ratchets for 1/4" sockets, 3/8" sockets and 1/4" bits	FR100	1	$31.93	$31.93
VIM DAHLDR2-RED	magnetic base DA sander holder for 2 sanders	DAHLDR2-RED	2	$24.94	$49.88
VIM Tools HDMSET	Finger bit holders, magnetic	HDMSET	1	$18.42	$18.42
Total					$154.23

wildetool.com

Part Description P/N Qty. Unit Price Total

Wilde K20.NP 20-piece master mechanics punch and chisel set K20.NP 1 $105.46 $105.46

Total $105.46

Part	Description	P/N	Qty.	Unit Price	Total
Wilde K20.NP	20-piece master mechanics punch and chisel set	K20.NP	1	$105.46	$105.46
Total	$105.46

www.sears.com

Part	Description	P/N	Qty.	Unit Price	Total
Craftsman 47394	3-piece retaining ring plier set in blow-molded case	47394	1	$79.99	$79.99
Grip-On 80857	ErgoGrip 70-degree locking pliers	80857	1	$40.00	$40.00
Total					$119.99

www.toolsdelivered.com

Part	Description	P/N	Qty.	Unit Price	Total
Williams MWS-12RCF	12-piece flex-head reversible ratcheting set, 8mm - 19mm	MWS-12RCF	1	$141.28	$141.28
Williams MWS-4RC	4-piece combination reversible ratcheting set, 21mm, 22mm, 24mm, 25mm	MWS-4RC	1	$66.85	$66.85
Bahco 2979D-180	7" nut pliers	2979D-180	1	$43.21	$43.21
Bahco 325	12" ergo hacksaw	325	1	$28.11	$28.11
Bahco 2427G-200	60-degree curved nose pliers, ergo grip, 7"	2427G-200	1	$24.11	$24.11
Bahco 2533-8	Long nose pliers, ergo grip, 8"	2533-8	1	$20.78	$20.78
Bahco 2628G-180	7" ergo combination plier	2628G-180	1	$18.90	$18.90
Bahco 2628G-160	6.25" ergo combination plier	2628G-160	1	$17.77	$17.77
Bahco 2430G-140	Nose pliers, ergo grip, 5.5"	2430G-140	1	$13.09	$13.09
Bahco 2420G-125	Flat-nose pliers, ergo grip, 5"	2420G-125	1	$13.09	$13.09
Total					$387.19

www.lowes.com

Part Description P/N Qty. Unit Price Total

Knipex 26 12 200 D4A Knipex 8" comfort grip long-nose pliers with cutter 26 12 200 D4A 1 $28.97 $28.97

Total $28.97

Part	Description	P/N	Qty.	Unit Price	Total
Knipex 26 12 200 D4A	Knipex 8" comfort grip long-nose pliers with cutter	26 12 200 D4A	1	$28.97	$28.97
Total	$28.97

www.thetoolchest.ca

Part	Description	P/N	Qty.	Unit Price	Total
Toptul GPAA2602	26-piece long combination wrench set, 6-32mm	GPAA2602	1	$169.99	$169.99
Toptul GPBA1601	16-piece long combination wrench set, 1/4" - 1.25"	GPBA1601	1	$114.99	$114.99
Toptul GPAI1202	12-piece metric 75-degree offset double box wrench set	GPAF1001	1	$74.99	$74.99
Total					$359.97

www.bettymills.com

Part Description P/N Qty. Unit Price Total

Wright 788 10-piece miniature metric combination wrench set, 4mm - 11mm 788 1 $31.99 $31.99

Total $31.99

Part	Description	P/N	Qty.	Unit Price	Total
Wright 788	10-piece miniature metric combination wrench set, 4mm - 11mm	788	1	$31.99	$31.99
Total	$31.99

wylaco.com

Part Description P/N Qty. Unit Price Total

Estwing ball peen hammer set 5-piece ball peen hammer set (8oz, 12oz, 16oz, 24oz, 32oz) E3-8-24BP 1 $115.00 $115.00

Total $115.00

www.northerntool.com

Part	Description	P/N	Qty.	Unit Price	Total
Milwaukee 2662-22	1/2" drive 18V impact wrench with pin anvil	2662-22	1	$379.99	$379.99
Northern Tool 426268	14-piece blow gun kit	426268	1	$18.00	$18.00
Northern Tool 1591450	telescopic air blow gun	1591450	1	$10.00	$10.00
Milton S-138	blow gun with rubber tip and hook	S-138	1	$10.00	$10.00
Total					$417.99

www.abrasivesupply.com

Part Description P/N Qty. Unit Price Total

Dynabrade 69010 6" Silver Supreme 3/8" orbit random orbital 69010 1 $169.95 $169.95

Total $169.95

Part	Description	P/N	Qty.	Unit Price	Total
Dynabrade 69010	6" Silver Supreme 3/8" orbit random orbital	69010	1	$169.95	$169.95
Total	$169.95

www.factoryauthorizedoutlet.com

Part Description P/N Qty. Unit Price Total

Ingersoll-Rand 3128K 3" pneumatic random orbital 3128K 1 $107.99 $107.99

Total $107.99

Part	Description	P/N	Qty.	Unit Price	Total
Ingersoll-Rand 3128K	3" pneumatic random orbital	3128K	1	$107.99	$107.99
Total	$107.99

www.systainerworld.com

Part Description P/N Qty. Unit Price Total

Tanos Systainer II Tanos Systainer II with lid sort tray) Tanos Systainer II 1 $74.00 $74.00

Total $74.00

Part	Description	P/N	Qty.	Unit Price	Total
Tanos Systainer II	Tanos Systainer II with lid sort tray)	Tanos Systainer II	1	$74.00	$74.00
Total	$74.00

www.airtoolsforless.com

Part Description P/N Qty. Unit Price Total

Ingersoll-Rand 3102 90-degree die grinder 3102 1 $109.00 $109.00

Ingersoll-Rand 3108 straight die grinder 3108 1 $109.00 $109.00

Total $218.00

Part	Description	P/N	Qty.	Unit Price	Total
Ingersoll-Rand 3102	90-degree die grinder	3102	1	$109.00	$109.00
Ingersoll-Rand 3108	straight die grinder	3108	1	$109.00	$109.00
Total	$218.00

www.griotsgarage.com

Part Description P/N Qty. Unit Price Total

Griot's 10977 3" pneumatic random orbital 10977 1 $79.99 $79.99

Total $79.99

Part	Description	P/N	Qty.	Unit Price	Total
Griot's 10977	3" pneumatic random orbital	10977	1	$79.99	$79.99
Total	$79.99

www.trademotion.com

Part	Description	P/N	Qty.	Unit Price	Total
BMW 83.30.0.490.959	(formerly 90.88.6.114.380) camshaft press-down tool	BMW 83300490959	1	$604.00	$604.00
BMW 83300491148	(90.88.6.126.410) used with 83300493429 for external operation of VANOS adjustment unit	83300491148	1	$168.88	$168.88
BMW 83300493429	(90.88.6.126.050) switching unit for activating solenoids in VANOS	83300493429	1	$162.39	$162.39
BMW 90.88.6.119.130	camshaft setting gauge, needs 90.88.6.117.342	90886119130	1	$112.80	$112.80
BMW 83300493750	(90.88.6.119.140) camshaft timing gauge	83300493750	1	$97.18	$97.18
BMW 90.88.6.121.120	for unlocking edge connector on fuel injectors	90886121120	1	$32.13	$32.13
BMW 83.30.0.493.430	(90.88.6.117.130) for compressed air to VANOS	83300493430	1	$28.94	$28.94
BMW 83.30.0.490.861	(88.88.6.112.300) for securing crank position via vibration damper	83300490861	1	$23.76	$23.76
BMW 90.88.6.117.342	camshaft setting gauge, needs 90.88.6.119.130	90886117342	1	$13.36	$13.36
Total					$1243.44

www.comsew.com

Part Description P/N Qty. Unit Price Total

26" toolbox cover zippered toolbox cover for Craftsman 26" toolboxes toolboxcover26 2 $143.01 $286.02

Total $286.02

www.foamorder.com

Part Description P/N Qty. Unit Price Total

orange neoprene foam tool drawer liner, 2mm thick 2mmNeopreneFoam 1 $75.60 $75.60

Total $75.60

Part	Description	P/N	Qty.	Unit Price	Total
orange neoprene foam	tool drawer liner, 2mm thick	2mmNeopreneFoam	1	$75.60	$75.60
Total	$75.60

www.buypcsupplies.com

Part Description P/N Qty. Unit Price Total

26" toolbox cover no zippers toolbox cover for Craftsman 26" toolboxes, marine-grade nylon dustcover26 2 $30.00 $60.00

Total $60.00

Part	Description	P/N	Qty.	Unit Price	Total
26" toolbox cover no zippers	toolbox cover for Craftsman 26" toolboxes, marine-grade nylon	dustcover26	2	$30.00	$60.00
Total	$60.00

www.stanleysupplyservices.com

Part Description P/N Qty. Unit Price Total

Menda 35335 4 oz. one-touch solvent dispenser, metal can 35335 1 $15.08 $15.08

Total $15.08

Part	Description	P/N	Qty.	Unit Price	Total
Menda 35335	4 oz. one-touch solvent dispenser, metal can	35335	1	$15.08	$15.08
Total	$15.08

Totals by Vendor

Vendor	Total
www.amazon.com	$2403.38
www.homedepot.com	$258.94
www.toolbarn.com	$2504.76
www.tooltopia.com	$2153.96
buy1.snapon.com	$1471.50
www.ultimategarage.com	$285.00
chadstoolbox.com	$1151.09
www.etoolpros.com	$104.94
www.vimtools.com	$154.23
wildetool.com	$105.46
www.sears.com	$119.99
www.toolsdelivered.com	$387.19
www.lowes.com	$28.97
www.thetoolchest.ca	$359.97
www.bettymills.com	$31.99
wylaco.com	$115.00
www.northerntool.com	$417.99
www.abrasivesupply.com	$169.95
www.factoryauthorizedoutlet.com	$107.99
www.systainerworld.com	$74.00
www.airtoolsforless.com	$218.00
www.griotsgarage.com	$79.99
www.trademotion.com	$1243.44
www.comsew.com	$286.02
www.foamorder.com	$75.60
www.buypcsupplies.com	$60.00
www.stanleysupplyservices.com	$15.08
Total	$14384.43

Tools by Date

January 15, 2012

Part	Description	P/N	Qty.	Unit Price	Total
Snap-On FHR80	Snap-On 3/8" drive ratchet, quick-release, soft-grip Dual80	FHR80	1	$89.95	$89.95
Grey Pneumatic 82622D	22-piece 1/2" drive socket set, 3/8" - 1.5", deep, 6 pt.	82622D	1	$143.19	$143.19
Total					$233.14

Someday

Part	Description	P/N	Qty.	Unit Price	Total
Festool Systainer 5 T-Loc for strong detailing sprays	12" deep	497567	0	$86.00	$0.00
Festool Systainer cart	mobile base for Systainers	492388	1	$81.00	$81.00
Festool Systainer 4 T-Loc for detailing stuff, battery chargers	12" deep	497566	4	$80.00	$320.00
Festool Systainer 3 T-Loc for detailing stuff	8" deep	497565	1	$76.00	$76.00
Festool Systainer 1 T-Loc for detailing clay	4" deep	497563	0	$63.00	$0.00
Toolstud 10.5"	adjustable-height rolling cantilever toolbox	202018275	2	$119.00	$238.00
Wilton 14299	12" C-clamp, drop-forged, 6.3125" throat depth, copper plated spindle	14299	2	$119.00	$238.00
Wilton 14271	8" C-clamp, drop-forged, 5" throat depth, copper plated spindle	14271	4	$49.00	$196.00
Wilton 14257	6" C-clamp, drop-forged, 4.125" throat depth, copper plated spindle	14257	4	$39.00	$156.00
Irwin 2021450N	50" Quick-Grip XP one-handed bar clamp	2021450N	4	$37.00	$148.00
Irwin 2021463	36" Quick-Grip XP one-handed bar clamp	2021463	4	$33.00	$132.00
Irwin 2021424N	24" Quick-Grip XP one-handed bar clamp	2021424N	4	$29.00	$116.00
Wilton 14243	4" C-clamp, drop-forged, 3.25" throat depth, copper plated spindle	14243	4	$25.00	$100.00
SK 3911	3/8" drive 10-piece metric flex socket set, 10mm - 19mm	3911	1	$158.99	$158.99
Grey Pneumatic 81259CRD	59-piece 3/8" drive socket set, 5/16" - 1" and 7mm - 22mm, shallow and deep, 12 pt.	81259CRD	1	$149.79	$149.79
Snap-On FHOF80	Snap-On 3/8" drive ratchet, offset flex-head, soft-grip Dual80	FHOF80	1	$127.95	$127.95
Snap-On FHBF80	Snap-On 3/8" drive ratchet, bent flex-head, soft-grip Dual80	FHBF80	1	$127.95	$127.95
Bondhus 30887	3/8" drive 8-piece metric 6" long ProHold hex bit socket set, 3mm - 10mm	30887	1	$96.84	$96.84
VIM HXLM100	14-piece 3/8" drive extra long hex bit set, ball and regular, 3mm - 10mm	HXLM100	1	$52.90	$52.90
VIM HXL100	14-piece 3/8" drive extra long hex bit set, ball and regular, 1/8" - 3/8"	HXL100	1	$52.90	$52.90
Facom J.161E	short reach palm control ratchet	J.161E	1	$50.00	$50.00
Bondhus 30845	3/8" drive 7-piece SAE 6" long ProHold hex bit socket set, 1/8" - 3/8"	30845	1	$49.99	$49.99
VIM VI600	8-piece 3/8" drive stubby impact hex bit set, 1/4" - 3/4"	VI600	1	$20.07	$20.07
Wera 8795 B	Wera 3/8" universal	05003585001	1	$16.91	$16.91
Grey Pneumatic 89253CRD	53-piece 1/4" drive socket set, 3/16" - 9/16" and 4mm - 15mm, shallow and deep, 12 pt.	89253CRD	1	$120.89	$120.89
Snap-On TF72	Snap-On 1/4" drive, long flex-head ratchet	TF72	1	$82.25	$82.25
Snap-On THR72	Snap-On 1/4" drive comfort grip quick-release ratchet	THR72	1	$79.95	$79.95
Bondhus 30799	1/4" drive 9-piece 6" long ProHold Torx bit socket set, T8-T40	30799	1	$49.99	$49.99
EZ-Red SR14	1/4" drive ratchet with rotating handle	SR14	1	$49.49	$49.49
Snap-On TMR860	Snap-On 1/4" drive finger ratchet	TMR860	1	$41.75	$41.75
VIM SHI400	9-piece 1/4" drive stubby hex bit set, 3/32" - 3/8"	SHI400	1	$17.15	$17.15
Wera 8795 A	Wera 1/4" universal joint	05003528001	1	$15.13	$15.13
Snap-On SHLF80A	Snap-On 1/2" drive Dual80 ratchet, flex-head, 25.75", comfort grip	SHLF80A	1	$210.00	$210.00
Snap-On SHF80A	Snap-On 1/2" drive Dual80 ratchet, flex-head, 17.6875", comfort grip	SHF80A	1	$188.00	$188.00
Grey Pneumatic 82229MD	29-piece 1/2" drive socket set, 10mm - 36mm, deep, 12 pt.	82229MD	1	$171.89	$171.89
Snap-On SH80A	Snap-On 1/2" drive Dual80 ratchet, comfort grip	SH80A	1	$154.00	$154.00
Grey Pneumatic 82222D	22-piece 1/2" drive socket set, 3/8" - 1.5", deep, 12 pt.	82222	1	$144.99	$144.99
Grey Pneumatic 82229M	29-piece 1/2" drive socket set, 10mm - 36mm, shallow, 12 pt.	82229M	1	$138.89	$138.89
Grey Pneumatic 1726MD	1/2" drive 12-point deep metric master impact socket set	1726MD	1	$134.99	$134.99
Grey Pneumatic 1326MD	1/2" drive 12-point deep metric master impact socket set	1326MD	1	$127.59	$127.59
Grey Pneumatic 82222	22-piece 1/2" drive socket set, 3/8" - 1.5", shallow, 12 pt.	82222	1	$119.39	$119.39
Snap-On SN18B	18" breaker bar	SN18B	1	$95.25	$95.25
Grey Pneumatic 1726M	1/2" drive 12-point standard length metric master impact socket set	1726M	1	$73.19	$73.19
Grey Pneumatic 1326M	1/2" drive 6-point standard length metric master impact socket set	1326M	1	$71.39	$71.39
Wera 8795 C	Wera 1/2" drive universal	05003640001	1	$22.25	$22.25
VIM MR16B16C	16" Magrail TL, blue with 16 1/2" studs	MR16B16C	6	$17.49	$104.94
Snap-On SH936-12O	Snap-On 1/2" SoftGrip, orange	SH936-12O	3	$8.65	$25.95
Grey Pneumatic 2017MTP	1/2" drive extra-thin wall 17mm wheel/nut protector socket	2017MTP	2	$7.89	$15.78
Grey Pneumatic 2024TP	1/2" drive extra-thin wall 3/4" wheel/nut protector socket set	2024TP	1	$6.79	$6.79
Wera 7440/41/42	adjustable torque driver set, 0.3 - 6.0 Nm, 27-piece, 1/4" hex-drive	7440/41/42	1	$234.99	$234.99
Wera 05057122001	Wera 8600/889-60 TZ bit safe (61 pieces)	05057122001	1	$101.80	$101.80
Wera 05056948001	Kraftform Ratchet 98/4/1, 889/4/1 Rapidaptor, bits, case	05056948001	1	$84.65	$84.65
Snap-On SSDMRT1O	stubby ratcheting T-handle screwdriver, orange	SSDMRT1O	1	$56.50	$56.50
VIM Tools VIS112	Master ball-end set: T10-T55, 3/32" - 3/8" hex, 2mm - 10mm hex	VIS112	1	$54.00	$54.00
Snap-On SSDMR1AO	stubby ratcheting screwdriver, orange	SSDMR1AO	1	$51.50	$51.50
Wera 05051461001	Wera 816 RA ratcheting handle with rapidaptor	05051461001	1	$38.25	$38.25
Wiha 71990	39-piece security bit set with driver	71990	1	$43.03	$43.03
Wera 05002901001	Kraftform Vario ratcheting handle for Vario 6mmm blades	05002901001	1	$32.85	$32.85
VIM Tools FR100	Finger ratchets for 1/4" sockets, 3/8" sockets and 1/4" bits	FR100	1	$31.93	$31.93
Wera 05135956001	BiTorsion Rapidaptor 897/4 R and diamond-coated Bit-Check	05135956001	1	$31.34	$31.34
Wera 05056652001	Kraftform Kompakt 11, Rapidaptor, small Torx bits	05056652001	1	$28.41	$28.41
VIM Tools HDMSET	Finger bit holders, magnetic	HDMSET	1	$18.42	$18.42
Snap-On SGDMRC4-TM4	1/4" square drive shank, 5"	SGDMRC4-TM4	1	$16.20	$16.20
Mechanics Time Savers MTS584	Magnetic bit holder for 37 bits, solar orange	MTS584	2	$11.95	$23.90
Wera 870/1	1/4" hex drive to 1/4" square drive adapter	870/1	1	$9.07	$9.07
Wera 05032057002	Wera 3367 Torx stainless TX30x115mm	05032057002	1	$10.03	$10.03
Wera 05032056002	Wera 3367 Torx stainless TX27x115mm	05032056002	1	$9.54	$9.54
Wera 05032055002	Wera 3367 Torx stainless TX25x100mm	05032055002	1	$8.72	$8.72
Wera 05032054002	Wera 3367 Torx stainless TX20x100mm	05032054002	1	$8.16	$8.16
Wera 05032053002	Wera 3367 Torx stainless TX15x80mm	05032053002	1	$8.04	$8.04
Wera 05032052002	Wera 3367 Torx stainless TX10x80mm	05032052002	1	$7.96	$7.96
Wera 05032050002	Wera 3367 Torx stainless TX8x60mm	05032050002	1	$7.48	$7.48
Wera 05032051002	Wera 3367 Torx stainless TX9x60mm	05032051002	1	$7.48	$7.48
Wera 05018274001	Wera 932A ChiselDriver slotted 2.5x14x250mm	05018274001	1	$33.04	$33.04
Mayhew 60002	Dominator professional hook set	60002	1	$82.88	$82.88
Snap-On SGSR104	4-piece seal remover set	SGSR104	1	$41.20	$41.20
Mayhew 66302	Catspaw 4-piece curved-tip pry bar set	66302	1	$35.68	$35.68
Wilde K20.NP	20-piece master mechanics punch and chisel set	K20.NP	1	$105.46	$105.46
Wera 05007680001	Wera 334 SK/6 Lasertip set, hex shank, 4 slotted + 2 Phillips	05007680001	1	$40.60	$40.60
Wera 05008753001	Wera 350 SK PH Phillips #3	05008753001	1	$15.47	$15.47
Wera 05060050001	Wera 867/4Z Torx BO (security) blade TX10 X 89mm	05060050001	1	$7.67	$7.67
Wera 05060056001	Wera 867/4Z Torx BO (security) blade TX40 X 89mm	05060056001	1	$7.67	$7.67
Wera 05060054001	Wera 867/4Z Torx BO (security) blade TX30 X 89mm	05060054001	1	$7.67	$7.67
Wera 05060057001	Wera 867/4Z Torx BO (security) blade TX27 X 89mm	05060057001	1	$7.67	$7.67
Wera 05060053001	Wera 867/4Z Torx BO (security) blade TX25 X 89mm	05060053001	1	$7.67	$7.67
Wera 05060052001	Wera 867/4Z Torx BO (security) blade TX20 X 89mm	05060052001	1	$7.67	$7.67
Wera 05060051001	Wera 867/4Z Torx BO (security) blade TX15 X 89mm	05060051001	1	$7.67	$7.67
Wera 05060048001	Wera 867/4Z Torx BO (security) blade TX8 X 89mm	05060048001	1	$7.67	$7.67
Wera 05008750001	Wera 350 SK PH Phillips #0	05008750001	1	$6.46	$6.46
Wera 05060201001	Wera 867/4Z Torx blade TX30 X 152mm	05060201001	1	$6.09	$6.09
Wera 05060200001	Wera 867/4Z Torx blade TX27 X 152mm	05060200001	1	$6.09	$6.09
Wera 05060199001	Wera 867/4Z Torx blade TX25 X 152mm	05060199001	1	$6.09	$6.09
Wera 05060198001	Wera 867/4Z Torx blade TX20 X 152mm	05060198001	1	$6.09	$6.09
Wera 05060197001	Wera 867/4Z Torx blade TX15 X 152mm	05060197001	1	$6.09	$6.09
Wera 05060196001	Wera 867/4Z Torx blade TX10 X 152mm	05060196001	1	$6.09	$6.09
Wera 05060195001	Wera 867/4Z Torx blade TX8 X 152mm	05060195001	1	$6.09	$6.09
Wera 05110078001	Wera stubby slotted 1.2mm x 8.0mm	05110078001	1	$4.37	$4.37
Wera 05008782001	Wera stubby Phillips #3	05008782001	1	$3.54	$3.54
Grip-On GK500	locking pliers, 5 piece set	GK500	1	$100.00	$100.00
Knipex 3X8702	Knipex 3-piece Ergo Grip Cobra set	3X8702	1	$88.00	$88.00
Craftsman 47394	3-piece retaining ring plier set in blow-molded case	47394	1	$79.99	$79.99
Bahco 2753-9	Bahco 9.5" side-cutting rebar pliers	2753-9	1	$45.00	$45.00
Bahco 2979D-180	7" nut pliers	2979D-180	1	$43.21	$43.21
Knipex 38 35 200	Knipex S-shape 8 in. long nose pliers.	38 35 200	1	$40.61	$40.61
Grip-On 80857	ErgoGrip 70-degree locking pliers	80857	1	$40.00	$40.00
Knipex 31 25 160	Knipex angled needle nose pliers, 6.25 in.	31 25 160	1	$38.90	$38.90
NWS 138-69-200	NWS Fantastico Plus Heavy Duty Lever Side Cutter 200 mm	138-69-200	1	$35.63	$35.63
Knipex 38 91 200	Knipex 8 in. long-nose grabber	3891200	1	$31.59	$31.59
Knipex 26 22 200	Knipex angled needle nose pliers, 8 in.	26 22 200	1	$29.83	$29.83
NWS 128G-52-215	NWS 215mm angled mechanic's pliers	128G-52-215	1	$29.65	$29.65
Knipex 26 12 200 D4A	Knipex 8" comfort grip long-nose pliers with cutter	26 12 200 D4A	1	$28.97	$28.97
Bahco 2427G-200	60-degree curved nose pliers, ergo grip, 7"	2427G-200	1	$24.11	$24.11
Bahco 2533-8	Long nose pliers, ergo grip, 8"	2533-8	1	$20.78	$20.78
NWS 124-69-150	NWS 160mm long flat nose pliers	124-69-150	1	$20.67	$20.67
Knipex 8701 125	Knipex Micro Cobra	8701 125	1	$19.69	$19.69
Bahco 2628G-180	7" ergo combination plier	2628G-180	1	$18.90	$18.90
Bahco 2628G-160	6.25" ergo combination plier	2628G-160	1	$17.77	$17.77
Bahco 2430G-140	Nose pliers, ergo grip, 5.5"	2430G-140	1	$13.09	$13.09
Bahco 2420G-125	Flat-nose pliers, ergo grip, 5"	2420G-125	1	$13.09	$13.09
NWS 1311-69-200	NWS PowerBolt Fantastico End Cutter	1311-69-200	1	$39.87	$39.87
Facom 440.JU17T	17-piece fractional combination wrench set, 1/4" - 1.25"	440.JU17T	1	$235.00	$235.00
Gearwrench 85989	17-piece metric GearBox master set, 8mm-22mm, 24mm, 25mm	85989	1	$234.95	$234.95
Toptul GPAA2602	26-piece long combination wrench set, 6-32mm	GPAA2602	1	$169.99	$169.99
KD 85988	12-piece gear box (box end and ratcheting end) XXL set, 8-19mm	85988	1	$150.00	$150.00
Williams MWS-12RCF	12-piece flex-head reversible ratcheting set, 8mm - 19mm	MWS-12RCF	1	$141.28	$141.28
Stahlwille STW20/8	8 piece extra deep offset wrench set, 6mm - 20mm	STW20/8	1	$133.99	$133.99
E-Z Red NR5M	5-piece extra long flex-head ratcheting spline wrenches	NR5M	1	$123.99	$123.99
Knipex 3X8605	3-piece pliers wrench set, comfort grip	3X8605	1	$123.77	$123.77
GearWrench 85288	12-piece flex X-Beam combination ratcheting set, 8mm - 19mm	85288	1	$123.00	$123.00
GearWrench 9550	10-piece flex stubby combination ratcheting set, 10mm - 19mm	9550	1	$120.00	$120.00
SK 86188	8-piece 12-point SuperKrome short deep metric offset box wrench set, 6mm - 20mm	86188	1	$119.99	$119.99
Toptul GPBA1601	16-piece long combination wrench set, 1/4" - 1.25"	GPBA1601	1	$114.99	$114.99
Gearwrench 85999	13-piece SAE GearBox master set, 5/16" - 1"	85999	1	$109.00	$109.00
Gearwrench 85399	4-piece SAE S-shape reversible ratcheting set, 3/8" - 7/8"	85399	1	$92.99	$92.99
GearWrench 9903	4-piece metric flex-head ratcheting combination completer set: 21mm, 22mm, 24mm, 25mm	9903	1	$80.35	$80.35
Toptul GPAI1202	12-piece metric 75-degree offset double box wrench set	GPAF1001	1	$74.99	$74.99
Williams MWS-4RC	4-piece combination reversible ratcheting set, 21mm, 22mm, 24mm, 25mm	MWS-4RC	1	$66.85	$66.85
Knipex 86 03 300	12-inch pliers wrench	86 03 300	1	$61.99	$61.99
Gearwrench 9240	4-piece SAE double box end ratcheting set, 5/16" - 3/4"	9240	1	$43.95	$43.95
Wright 788	10-piece miniature metric combination wrench set, 4mm - 11mm	788	1	$31.99	$31.99
GearWrench 9716	1" flex-head ratcheting combination wrench	9716	1	$29.79	$29.79
GearWrench 9715	15/16" flex-head ratcheting combination wrench	9715	1	$29.79	$29.79
GearWrench 9714	7/8" flex-head ratcheting combination wrench	9714	1	$24.88	$24.88
GearWrench 9713	13/16" flex-head ratcheting combination wrench	9713	1	$24.88	$24.88
GearWrench 9704	11/32" flex-head ratcheting combination wrench	9704	1	$19.00	$19.00
GearWrench 9705	5/16" flex-head ratcheting combination wrench	9705	1	$13.13	$13.13
Estwing ball peen hammer set	5-piece ball peen hammer set (8oz, 12oz, 16oz, 24oz, 32oz)	E3-8-24BP	1	$115.00	$115.00
Astro Pneumatic 5520	3-piece deadblow ball peen hammer set (16oz, 32oz, 40oz)	5520	1	$75.00	$75.00
Snap-On HBFE32	13.5" long, 32 oz. dead blow soft-grip hammer	HBFE32	1	$51.40	$51.40
Milwaukee 2662-22	1/2" drive 18V impact wrench with pin anvil	2662-22	1	$379.99	$379.99
Dynabrade 69010	6" Silver Supreme 3/8" orbit random orbital	69010	1	$169.95	$169.95
Bosch CC2130	Clic-Change 27-piece drilling and driving set	CC2130	1	$149.00	$149.00
Ingersoll-Rand 3128K	3" pneumatic random orbital	3128K	1	$107.99	$107.99
Tanos Systainer II	Tanos Systainer II with lid sort tray)	Tanos Systainer II	1	$74.00	$74.00
Ingersoll-Rand HXNSK-9M	metric nut setter set, 5.5-13mm	HXNSK-9M	1	$29.99	$29.99
VIM NMS100	metric nut setter master set, 8mm, 10-14mm (magnetic and hollow)	NSM100-03	1	$28.13	$28.13
VIM DAHLDR2-RED	magnetic base DA sander holder for 2 sanders	DAHLDR2-RED	2	$24.94	$49.88
Neiko 10065A	metric nut setter set, 6-13mm	10065A	1	$8.95	$8.95
Milwaukee 48-32-5032	1/4" hex to 1/2" socket drive adapter	48-32-5032	2	$3.99	$7.98
Milwaukee 48-32-5031	1/4" hex to 3/8" socket drive adapter	48-32-5031	2	$3.49	$6.98
Milwaukee 48-32-5030	1/4" hex to 1/4" socket drive adapter	48-32-5030	2	$2.99	$5.98
Ingersoll-Rand 2025MAX	3/8" drive impact ratchet, 180 ft-lbs	2025MAX	1	$262.99	$262.99
Ingersoll-Rand 3102	90-degree die grinder	3102	1	$109.00	$109.00
Ingersoll-Rand 3108	straight die grinder	3108	1	$109.00	$109.00
Aircat ACR801R	3/8" drive air ratchet, short, 35 ft-lbs	ACR801R	1	$92.50	$92.50
Griot's 10977	3" pneumatic random orbital	10977	1	$79.99	$79.99
Aircat ACR802R	3/8" drive air ratchet, 70 ft-lbs	ACR802R	1	$78.99	$78.99
Aircat ACR800	1/4" drive air ratchet	ACR800	1	$74.05	$74.05
Northern Tool 426268	14-piece blow gun kit	426268	1	$18.00	$18.00
Northern Tool 1591450	telescopic air blow gun	1591450	1	$10.00	$10.00
Milton S-138	blow gun with rubber tip and hook	S-138	1	$10.00	$10.00
Bondhus 32432	Tamper-proof Torx key set, T6-T25	32432	1	$22.99	$22.99
Bondhus 32434	Tamper-proof Torx key set, T9-T40	32434	1	$19.64	$19.64
Bondhus 31832	Torx key set, T6-T25	31832	1	$15.05	$15.05
BMW 83.30.0.490.959	(formerly 90.88.6.114.380) camshaft press-down tool	BMW 83300490959	1	$604.00	$604.00
BMW 83300491148	(90.88.6.126.410) used with 83300493429 for external operation of VANOS adjustment unit	83300491148	1	$168.88	$168.88
BMW 83300493429	(90.88.6.126.050) switching unit for activating solenoids in VANOS	83300493429	1	$162.39	$162.39
BMW 90.88.6.119.130	camshaft setting gauge, needs 90.88.6.117.342	90886119130	1	$112.80	$112.80
BMW 83300493750	(90.88.6.119.140) camshaft timing gauge	83300493750	1	$97.18	$97.18
BMW 90.88.6.121.120	for unlocking edge connector on fuel injectors	90886121120	1	$32.13	$32.13
BMW 83.30.0.493.430	(90.88.6.117.130) for compressed air to VANOS	83300493430	1	$28.94	$28.94
BMW 83.30.0.490.861	(88.88.6.112.300) for securing crank position via vibration damper	83300490861	1	$23.76	$23.76
BMW 90.88.6.117.342	camshaft setting gauge, needs 90.88.6.119.130	90886117342	1	$13.36	$13.36
26" toolbox cover	zippered toolbox cover for Craftsman 26" toolboxes	toolboxcover26	2	$143.01	$286.02
SK 4508	SAE crowfoot flare set, 3/8" drive, 3/8" - 1"	4508	1	$128.00	$128.00
KD 41690	front end service kit	41690	1	$78.99	$78.99
orange neoprene foam	tool drawer liner, 2mm thick	2mmNeopreneFoam	1	$75.60	$75.60
VIM XZNS1000	XZN sockets in Magrail TL organizer	XZNS1000	1	$52.80	$52.80
GearWrench 80580	12-piece hex bit socket set, 2-12mm	80580	1	$44.62	$44.62
GearWrench 80725	13-piece Torx Tamper-Proof socket set	80725	1	$43.61	$43.61
Donegan OptiVISOR DA-7 with LP-1 loupe	glass lens 2.75X magnifying visor	DA-7, LP-1	1	$39.48	$39.48
GearWrench 80720	7-piece hex bit socket set, 6-19mm	80720	1	$37.43	$37.43
GearWrench 80723	13-piece Torx socket set	80723	1	$34.90	$34.90
Blue-Point VT1A	valve stem inserter	VT1A	1	$31.70	$31.70
26" toolbox cover no zippers	toolbox cover for Craftsman 26" toolboxes, marine-grade nylon	dustcover26	2	$30.00	$60.00
Bahco 325	12" ergo hacksaw	325	1	$28.11	$28.11
Bondhus 48492	6-12mm hollow shaft nut drivers	48492	1	$24.42	$24.42
SensGard Zem	hearing protection	ZM1	2	$19.99	$39.98
Custom LeatherCraft 140L	framer's glove, large	140L	1	$16.57	$16.57
Youngstown 03-3110-80-M	carpenter's glove, gray	03-3110-80-M	1	$16.30	$16.30
Occunomix 481W-044	framer's glove, large	481W-044	1	$16.30	$16.30
Menda 35335	4 oz. one-touch solvent dispenser, metal can	35335	1	$15.08	$15.08
Custom Leathercraft 5021	impact driver holster for 12V impact driver	5021	1	$7.99	$7.99
Bondhus 48482	13mm hollow shaft nut driver	48482	1	$5.84	$5.84
Bahco 302-35	tube cutter	302-35	1	$0.00	$0.00
Bahco 1084	mini tube bender	1084	1	$0.00	$0.00
Williams 43621	mini tube bender	43621	1	$0.00	$0.00
Total					$14167.59

Totals by Date

Date Total

Jan 15, 2012 $233.14

Someday $14167.59

Total $14400.73